Sew What’s Up Presents
The Sew What’s New Archive
This archived content is from Mary Wilkins’ sewing and
quilting message board “Sew What’s New,” which was
retired in August 2007. It is being provided by
“Sew What’s Up,”
which serves as the new home for many members of “Sew What’s New.”
From: valeriep
Date: 04-29-2004, 11:14 AM (1 of 6)
|
Hello, Im enjoying reading all messages on this site its very interesting but i havent seen any comments on Oiling your machine. I have had my Toyota sewing machine for over 6 years and in this time , i have honestly only oiled it twice. it is not laziness but sheer ignorance as to where to put the oil. (i must add that i dont have any problems with my machine) i have mislaid the manual somewhere and dont want to carry my machine to a specialist (for what should be a simple job) please can you give any simple guidelines of the type of oil and where to place it and how long to leave it afterward this thanks in advance valerie 
Always beready to be inspired
|
User: valeriep
Member since: 04-29-2004 Total posts: 13 |
From: paroper
Date: 04-29-2004, 12:10 PM (2 of 6)
|
http://www.sewusa.com/Sewing%20Machine%20Manuals/Toyota%20Sewing%20Machines.htm Here is a link to a spot where you may be able to get a new sewing machine manual. I know that they are pretty picky about what weight of oil I use on my machine and I can actually cost myself a service call if I don't use the right one. TAll the machines are just a little different about where you put the oil too so it might be a good idea to get hold of a manual before you begin. My new machine needs to be oiled quite often, my old machine could go quite a while. At any rate, your probably needs a little attention. pam
Bernina 200e, Artista V5 Designer Plus, Explorations, Magic Box, Bernina 2000DE & 335 Bernette Serger, Bernina 1530 Sewing Machine, Bernina 1300 DC Overlock (with coverstitch) |
User: paroper
Member since: 02-03-2004 Total posts: 3775 |
From: valeriep
Date: 04-29-2004, 12:31 PM (3 of 6)
|
thank you i know you are right. my machine does need some TLC before it is too late. I have visited the website and it provides useful info and i have added it to my 'favourite' website list thanks Always beready to be inspired
|
User: valeriep
Member since: 04-29-2004 Total posts: 13 |
From: paroper
Date: 04-29-2004, 01:16 PM (4 of 6)
|
I'm glad it helped.
pam
Bernina 200e, Artista V5 Designer Plus, Explorations, Magic Box, Bernina 2000DE & 335 Bernette Serger, Bernina 1530 Sewing Machine, Bernina 1300 DC Overlock (with coverstitch) |
User: paroper
Member since: 02-03-2004 Total posts: 3775 |
From: MartySews
Date: 04-30-2004, 09:06 AM (5 of 6)
|
Our guild had a class recently on caring and maintaining your sewing machine. First off, on all machines, clean the lint after every use. Change your needles frequently. It will extend the life of your machine. Generically, use oil sparingly. A dab in the bobbin shuttle should do it for a smoother performance. When in doubt, take it to the pros. The newer model machines are much more finicky than our older models. However, like a vehicle, they need regular maintenance check-ups for a great performance. Happy Stitching! Marty It takes one moment to change a life.
|
User: MartySews
Member since: 02-23-2003 Total posts: 504 
|
From: valeriep
Date: 05-02-2004, 05:11 PM (6 of 6)
|
thank you Before i use my machine again i will change the needle, clear my machine of lint (fluff?) and oil the moving parts as you suggested. i used to have a car and was very careful to maintain it- but there is no real pressure to maintain your sewing machine! The course you attend sounds fantastic - thanks for your knowledge. valerie Always beready to be inspired
|
User: valeriep
Member since: 04-29-2004 Total posts: 13 |
Visit Sew What’s Up for the latest sewing and quilting tips and discussions.
This page was originally located on Sew What’s New (www.sew-whats-new.com) at http://www.sew-whats-new.com/vb/archive/index.php/t-12729.html
Sew What’s Up is hosted by ZenSoft