Sew, What's Up

Sew What’s Up Presents

The Sew What’s New Archive

This archived content is from Mary Wilkins’ sewing and quilting message board “Sew What’s New,” which was retired in August 2007. It is being provided by “Sew What’s Up,” which serves as the new home for many members of “Sew What’s New.”
From: angela53
Date: 01-01-2005, 12:09 PM (1 of 4)
I have looked EVERYWHERE! I need help on how to rethread the bobbin in an old singer touch and sew model 645. It was my grandmothers. I now have a grandchild and what to use the machine for basic sewing.

Does anyone remember this machine and if so, can you help!?
Thanks Much
Angela53 :bang:
User: angela53
Member since: 01-01-2005
Total posts: 1
From: MaryW
Date: 01-01-2005, 01:45 PM (2 of 4)
test test test
owner/editor of Sew Whats New
User: MaryW
Member since: 06-23-2005
Total posts: 2542
From: wghmch
Date: 01-03-2005, 12:28 AM (3 of 4)
You can find lots of help at Terry's Touch-N-Sew Site (

Bill Holman
User: wghmch
Member since: 03-04-2003
Total posts: 249
From: marl
Date: 01-04-2005, 09:29 AM (4 of 4)
My Touch and Sew 750 machine winds the bobbin in place. There is a button to the left of the bobbin. Press this button to the left to engage it in winding position. Wrap thread around the presser foot screw and hold end of thread firmly. Run the machine at a moderate speed. Pull thread end away after a few coils have been wound. Close slide plate to release push button to sewing position. I'm not familiar with the 645 model, but suspect that the "Touch and Sew" technology is similar.
User: marl
Member since: 12-03-2004
Total posts: 16
Sew, What's Up
Search the “Sew What’s New” Archive:
Visit Sew What’s Up for the latest sewing and quilting tips and discussions.
This page was originally located on Sew What’s New ( at