Sew What’s Up Presents
The Sew What’s New Archive
This archived content is from Mary Wilkins’ sewing and
quilting message board “Sew What’s New,” which was
retired in August 2007. It is being provided by
“Sew What’s Up,”
which serves as the new home for many members of “Sew What’s New.”
From: JuneD
Date: 01-23-2005, 12:01 PM (1 of 5)
| I received a Pfaff 2124 for Christmas. The machine sewed beautifully for almost one month now. However, like my older Pfaff Quiltstyler, the tension has become an issue to the point where I cannot use it. I have tried all variables I can think of, i.e. different thread in top and bobbon, different tensions, different fabric, needle, I have even blown out the tension disks with a compressor all to no avail. The bottom threads are medius to large hoops. I have also had this problem with my Quiltstyler. I bring it in and get it back basically the same way. Now on the Quiltstyler, the tension selection is all the way up to 8 and still have the top thread coming through to the bottom. Like I said, I have tried all different threads, both matching in top and bobbin. I am ready to throw out Pfaff! Anyone think they can be of assistance? Please Please |
User: JuneD
Member since: 01-23-2005 Total posts: 1 |
From: Catalina
Date: 01-23-2005, 01:51 PM (2 of 5)
|
I wish I could help. I have a 1475 and no tension problems- knock on wood. I know the newer machines are more touchy. Go to Pfaff talk- its a Pfaff message board. There should be someone there that may be of help. Good Luck- the 2144 is a nice machine. It must be something minor I bet.  Penny
|
User: Catalina
Member since: 01-06-2005 Total posts: 119 |
From: plrlegal
Date: 01-23-2005, 09:27 PM (3 of 5)
|
JuneD: I have a 2044 and the only time I had a tension problem was after it was supposedly serviced by the Pfaff dealer I bought it from. I haven't taken it back since and I was able to get the tension problem straightened out myself by adjusting the bobbin tension. Have you tried that? Righty-tighty, lefty-loosey. I make just very minor movements of the bobbin screw. This is one of those instances where a little goes a long way and more does not necessarily mean better, if you know what I mean. Patsy Patsy
|
User: plrlegal
Member since: 05-19-2001 Total posts: 318 |
From: Kylnne2
Date: 01-24-2005, 01:31 AM (4 of 5)
| I have a little mechanical 1530 and I have never even had to change my tension. I suggest to take the machine back into the repair man and sit and sew with him to show the tech what the machine (s) is (are) doing. I would take all of the machines in. I wish you luck. |
User: Kylnne2
Member since: 07-10-2004 Total posts: 629 |
From: heathermomster
Date: 04-17-2005, 06:46 PM (5 of 5)
|
Hi There, Own a 6122 and used MILs 1222e for some time. I experienced your tension problems first hand and corrected them by doing two things: 1. Thread the machine with the presser bar up. Otherwise, the upper thread will not go through the tension disks. 2. Always be sure that the bobbin case is seated in the hook properly. Listen for a little snap. Sometimes when you are frustrated, you don't always get the bobbin case back in the hook/race area quite right. If you are darning and experience problems, be sure the presser bar is in the darning position. Read the manual to see what I mean. Good Luck and Blessings, Heather |
User: heathermomster
Member since: 04-17-2005 Total posts: 2 |
Visit Sew What’s Up for the latest sewing and quilting tips and discussions.
This page was originally located on Sew What’s New (www.sew-whats-new.com) at http://www.sew-whats-new.com/vb/archive/index.php/t-14813.html
Sew What’s Up is hosted by ZenSoft