From: jobarker
Date: 02-26-2005, 09:31 PM (1 of 5)
I am new at quilting, I am taking a course. I have a walking foot for my machine but I have no idea how to attach the thing. Anybody have any detailed information, hellllllp!
Take care
Johanna [IMG][font=Courier New][size=2][color=Red] |
User: jobarker
Member since: 02-26-2005 Total posts: 2 |
From: Chrysantha
Date: 02-26-2005, 09:37 PM (2 of 5)
The little arm goes on the TOP of your needle screw. (so that is goes up and down with the needle). The foot attches the same way all others do, with the screw on the side. (it'll clatter, they all do....)
Chrys
|
User: Chrysantha
Member since: 09-06-2002 Total posts: 2414 |
From: jobarker
Date: 02-26-2005, 09:58 PM (3 of 5)
I attached it but there is a lot of room between the foot and the machine, what am I doing wrong?
Take care
Johanna [IMG][font=Courier New][size=2][color=Red] |
User: jobarker
Member since: 02-26-2005 Total posts: 2 |
From: Llantrisant
Date: 02-28-2005, 02:36 PM (4 of 5)
Did you tighten the screw enough? theres supposed to be some room under that to give the fabric room to move.it doesn't sit on the needle plate like your regular foot does.
If at first you don't suceed, try-try again!
|
User: Llantrisant
Member since: 06-02-2002 Total posts: 144 |
From: wghmch
Date: 03-01-2005, 12:11 PM (5 of 5)
I attached it but there is a lot of room between the foot and the machine, what am I doing wrong? I don't believe you mentioned what make/model your machine is. If you have a low shank walking foot and your machine is a high shank or a Singer slant, this is what would happen. Bill Holman |
User: wghmch
Member since: 03-04-2003 Total posts: 249 |
Visit Sew Whats Up for the latest sewing and quilting tips and discussions.
This page was originally located on Sew Whats New (www.sew-whats-new.com) at http://www.sew-whats-new.com/vb/archive/index.php/t-15156.html
Sew Whats Up is hosted by ZenSoft