Sew What’s Up Presents
The Sew What’s New Archive
This archived content is from Mary Wilkins’ sewing and
quilting message board “Sew What’s New,” which was
retired in August 2007. It is being provided by
“Sew What’s Up,”
which serves as the new home for many members of “Sew What’s New.”
From: bridesmom
Date: 09-07-2005, 04:58 PM (1 of 8)
My MIL brought me over an older Singer Stylist 513 that she picked up at a thrift store which seems to run. I have ordered a downloadable manual from sewusa.com which I am waiting for. The machine doesn't have a presser foot or a needle and I'm having a hard time trying to find anything on line. Anyone know of this machine and where I can get feet?? It looks like a low shank but only has the screw on the post (leg?). I'm assuming it uses a universal needle, I just found a threading diagram so will attempt to do that right now. Thanks everyone 
Laura
Tickled pink with my Innovis 4000D |
User: bridesmom
Member since: 01-21-2004 Total posts: 2026 |
From: Kylnne2
Date: 09-08-2005, 04:54 AM (2 of 8)
| You might want to check with sewing repair shops for some Singer feet. They seem to usually always have some hanging around and they charge little for them. I would stick with Singer needles for the machine. You might want to check on line for both the needles and feet if you have no place close to buy them. Many on line dealers carry them. You can order from magazines and on line for both also from Clotildes and Sewing with Nancy. |
User: Kylnne2
Member since: 07-10-2004 Total posts: 629 |
From: westbrook
Date: 09-08-2005, 05:19 AM (3 of 8)
|
the Singer Stylist is a low shank machine. Any Sewing Machine repair shop will have feet for it. While the Singer needle is recommended, any machine needle will work. I use Schmetz in all of my Singer machines and have had no problems with them at all. If you have any questions about your machine, email me and I will be happy to talk to you about your machine. <email address removed for privacy> Brook |
User: westbrook
Member since: 12-13-2004 Total posts: 35 |
From: cjzimm
Date: 09-14-2005, 11:20 AM (4 of 8)
| Hi, Your model is my very first new machine that was a graduation present in 1978. I've sewed mountains of things with it. It is a low shank and the feet are the snap on type with the correct mount. If you are in an area that doesn't have a Singer repair shop and don't mind calling to WV I know my guy at the singer shop could help you. 304-232-0130 ask for Doug, tell him Cathy from Martins Ferry put his number out on the net. I bet he would even mail parts to you. He knows his stuff. Most sew and vac or fast service repair shops can also order these parts. My email address is <email address removed for privacy> if there is something else I can help you with on this machine. CJ |
User: cjzimm
Member since: 09-13-2005 Total posts: 9 |
From: bridesmom
Date: 09-15-2005, 01:16 AM (5 of 8)
|
My hubby took the machine apart and we found that the feeder gear was broken, otherwise the machine seems to function perfectly. So I got onto ebay and found one for $3 which I am waiting for. This machine, once running will be donated to a local youth shelter here in town for doing clothing repairs for the homeless youth. I'm seriously hoping to be able to also volunteer some time doing some patching and mending as well. I've still got to get a supply of bobbins for it and thread, and fabric patches.
Laura
Tickled pink with my Innovis 4000D |
User: bridesmom
Member since: 01-21-2004 Total posts: 2026 |
From: OnAMissionBC
Date: 09-16-2005, 10:51 PM (6 of 8)
There is a Singer dealer in Burnaby that is quite knowledgable...I've called there a couple times when I was stuck with my machine. There is also one in Surrey, but I haven's dealt with them. Good luck with your machine, Laura, the youth shelter will surely benefit from having it. 
Barb
Don't worry about the world coming to an end today. It's already tomorrow in Australia. |
User: OnAMissionBC
Member since: 03-16-2005 Total posts: 20 
|
From: Tom Land
Date: 09-21-2005, 12:22 AM (7 of 8)
|
When replacing the feed gear both gears of the set should be replaced. Afterwards the feed must be timed and then the hook will have to be retimed. Almost any sewing machine repairman can do this but it is unlikely they will do it with gears you purchased elsewhere. It is recommended that all four gears be replaced since they are all the same age (approx. 30 years now) and you can expect the others to break soon. This machine is ussually well worth the expense providing the drive belt (not the motor belt) is in good shape.
Have fun or don't do it, Tom
|
User: Tom Land
Member since: 09-21-2005 Total posts: 514 |
From: bridesmom
Date: 09-21-2005, 03:28 AM (8 of 8)
|
Thanks Tom for the info. I had read that it was best to replace the gears in pairs. And it certainly seems worthwhile to have the machine serviced, then I know it will work properly once I get it back. I'd hate to donate it and have it break down in a few days!!
Laura
Tickled pink with my Innovis 4000D |
User: bridesmom
Member since: 01-21-2004 Total posts: 2026 |
Visit Sew What’s Up for the latest sewing and quilting tips and discussions.
This page was originally located on Sew What’s New (www.sew-whats-new.com) at http://www.sew-whats-new.com/vb/archive/index.php/t-16810.html
Sew What’s Up is hosted by ZenSoft