Sew, What's Up

Sew What’s Up Presents

The Sew What’s New Archive

This archived content is from Mary Wilkins’ sewing and quilting message board “Sew What’s New,” which was retired in August 2007. It is being provided by “Sew What’s Up,” which serves as the new home for many members of “Sew What’s New.”
From: dangerrr
Date: 11-14-2005, 09:27 PM (1 of 3)
threee things go wrong each time i attempt to use the machine.
1. thread on bottom breaks.
2. thread on top breaks.
3. thread bunches.

can someone tell me step by step how- to fix the problems?
User: dangerrr
Member since: 11-14-2005
Total posts: 4
From: esrun3
Date: 11-14-2005, 09:48 PM (2 of 3)
I don't have that particular Singer model but I do own some Singers. Is your bobbin threaded in the correct direction? Some need to be inserted so the thread comes off clockwise and some counterclockwise. My two are counterclockwise. This is one of the biggest reasons I've found on Singers for the thread to bunch up at the bottom. Try rethreading your top thread also. Then see how it works. If you need a manual for your machine or some other tips, you might try looking at the website, I think it's www.singer.com (but I'm not positive). If you have any more questions, ask! I'm sure someone will have the answer
Lyn
User: esrun3
Member since: 12-02-2004
Total posts: 2345
From: sewingdiva
Date: 11-20-2005, 02:23 AM (3 of 3)
I'm not an expert and don't have a Singer machine but here is some general advice, based on books/online suggestions i have read:

1. Change your needle and ensure you are using the correct needle for you fabric / thread type. eg. Ball point for knits; universal/sharp for wovens; etc.

2. Check your thread - is your thread appropriate for what you are using it for? For example, polyester or wooly nylon should be used for knits. Stronger thread should be used for heavy duty fabric like denim, canvas. Cheap cotton thread, especially 2 ply may break easily.

One time i was sewing with cotton thread - i didn't realize it and my thread kept on breaking. I switched to polyester and no more breakage.

3. Make sure you are not pushing/pulling when sewing. The fabric should only be guided in its path.

4. Adjust tension if necessary - both the top and bottom (bobbin) tensions can be adjusted. They sometimes need to be adjusted according to the stitch (straight vs. zig zag)you are using, the fabric type, or purpose of the stitching (eg. basting, gathering...).

5. Do some maintenance on your machine. Clean the tension discs, feed dogs and hook race (bobbin area) and apply machine oil if you haven't in a long time.

If all else fails - take it in to the store you bought it from or a local dealership that services Singers. It's possible something isn't right with your machine and needs to be adjusted.

Good luck!
User: sewingdiva
Member since: 10-23-2005
Total posts: 22
Sew, What's Up
Search the “Sew What’s New” Archive:
Visit Sew What’s Up for the latest sewing and quilting tips and discussions.
This page was originally located on Sew What’s New (www.sew-whats-new.com) at http://www.sew-whats-new.com/vb/archive/index.php/t-17362.html