Sew What’s Up Presents
The Sew What’s New Archive
This archived content is from Mary Wilkins’ sewing and
quilting message board “Sew What’s New,” which was
retired in August 2007. It is being provided by
“Sew What’s Up,”
which serves as the new home for many members of “Sew What’s New.”
From: Traquel
Date: 11-18-2005, 05:03 AM (1 of 4)
| I need to find a darning plate for my ls 1520, I've searched the brother site without luck. Does anyone have any ideas? |
User: Traquel
Member since: 10-17-2005 Total posts: 2 
|
From: Tom Land
Date: 12-12-2005, 11:19 AM (2 of 4)
|
If you can't locate a plate you can improvise. I have seen some people just tape a piece of thin cardboard over the feed dogs. I have also seen pastic used, like the lid off a coffee can. Good luck Have fun or don't do it, Tom
|
User: Tom Land
Member since: 09-21-2005 Total posts: 514 |
From: Tom Land
Date: 12-12-2005, 10:00 PM (3 of 4)
|
I had forgotten. There is a darning plate made for your machine. It is actually a generic plate for all machines that don't have the ability to drop the feed dogs. Tell your local dealer the part number is P60402. He/She should know which distributors to get it from by that number.
Have fun or don't do it, Tom
|
User: Tom Land
Member since: 09-21-2005 Total posts: 514 |
From: rfell
Date: 12-22-2005, 07:42 PM (4 of 4)
|
I have the Brother XL 5130 and I have the darning plate with it. I have draw the design on the material and then do the embroidery using the hoop and moving the hoop. I have been trying to find designs and I think I have to look for coloring books to get my designs from. Ruth Fell |
User: rfell
Member since: 10-31-2005 Total posts: 1 |
Visit Sew What’s Up for the latest sewing and quilting tips and discussions.
This page was originally located on Sew What’s New (www.sew-whats-new.com) at http://www.sew-whats-new.com/vb/archive/index.php/t-17392.html
Sew What’s Up is hosted by ZenSoft