Sew, What's Up

Sew What’s Up Presents

The Sew What’s New Archive

This archived content is from Mary Wilkins’ sewing and quilting message board “Sew What’s New,” which was retired in August 2007. It is being provided by “Sew What’s Up,” which serves as the new home for many members of “Sew What’s New.”
From: Isabel
Date: 03-19-2007, 09:50 AM (1 of 9)
Got two for my birthday and can't really see the advantage- I get pretty good results with two threads in one eye.
And how do you thread this baby? I end up threading it out of the machine, then inserting it- there haas got to be a better way. It also is pretty picky about what threads to use- any tips?
Isabel
User: Isabel
Member since: 10-19-2005
Total posts: 6
From: MaryW
Date: 03-19-2007, 12:13 PM (2 of 9)
I have never heard of them. I have seen needles that look like they have two eyes. They are for those who cannot see to thread the needle. You pull the thread from the top into the actual eye.
MaryW
owner/editor of Sew Whats New
User: MaryW
Member since: 06-23-2005
Total posts: 2542
From: luv2sew
Date: 03-19-2007, 01:20 PM (3 of 9)
If you are talking about the needle with an eye at each end, I use it when serging to pull the threads back under the serged threads to secure the ends. It is also useful in knitting and crochet. These are just a couple of things for which I use it.
Luv2sew
An act of kindness is never wasted!!
User: luv2sew
Member since: 05-21-2004
Total posts: 174
From: momrose
Date: 03-25-2007, 04:09 AM (4 of 9)
Got two for my birthday and can't really see the advantage- I get pretty good results with two threads in one eye. And how do you thread this baby? I end up threading it out of the machine, then inserting it

Isabel,

I have one of the double-eyed needles and thread the machine and needle like I do with a twin needle, making sure the 2 threads come in to the eyes from different directions. I have pretty good luck with it and haven't had good luck trying to use 2 threads in one eye. What's YOUR secret?

momrose
~~~~~
momrose
User: momrose
Member since: 03-24-2007
Total posts: 4
From: Teri
Date: 05-03-2007, 11:12 AM (5 of 9)
A poster on my Bernina group uses the DEN to baste with, here's a quote from her:

Basting Stitchby using a double eyed needle and the ---^-----^-----^ hemstitch;
by threading through the upper eye of the needle, the machine only makes a stitch on the ^ so you
get a long lengthed stitch! Amazingly simple technology.

I haven't tried this myself, but plan to as the basting stitch on my Bernina 930 isn't working right now
:up:
Teri

"Where are we going, and why am I in this basket?"
User: Teri
Member since: 09-14-2005
Total posts: 66
From: wghmch
Date: 05-03-2007, 03:13 PM (6 of 9)
"Basting Stitch-by using a double eyed needle and the ---^-----^-----^ hemstitch; by threading through the upper eye of the needle, the machine only makes a stitch on the ^ so you get a long lengthened stitch! Amazingly simple technology."

This "technology" is taking advantage of a disadvantage. On machines that have an oscillating shuttle instead of a rotary hook, the hook is traveling at half the speed of the rotary, and as a result, the "timing error" or variance in timing from full left to full right needle is twice as great. As a result, by putting the thread in a higher eye, it throws the machine a little farther out of time on one side of the ZZ, and it will only pick up the stitches on the side of the ^. On models that have the rotary hook, it is less likely (not impossible) that they will miss the stitches on the other side.

Bill Holman
User: wghmch
Member since: 03-04-2003
Total posts: 249
From: luv2sew
Date: 05-03-2007, 03:23 PM (7 of 9)
I see we were talking about two different types of needles. The one to which I referred was for hand use.
Luv2sew
An act of kindness is never wasted!!
User: luv2sew
Member since: 05-21-2004
Total posts: 174
From: MartySews2
Date: 05-03-2007, 06:32 PM (8 of 9)
The double eye needles that I use are for sergers as there is an "eye" on each end to pull the serger threads.
However, I have seen the other type that is used for handsewing and the top has 2 "eyes" for the thread. The extra eye is to help those whose eyesight is fading.
At least, that is what I have been told. :up:
Marty
User: MartySews2
Member since: 05-03-2007
Total posts: 293
From: LeapFrog Libby
Date: 05-04-2007, 06:47 PM (9 of 9)
Those hand sewing needles with what looks like 2 eyes are called 'self threading needles'.. or at least that is what the package was marked that my friend had.. the top eye has a small split and you just put the thread there and press it and it pops into the lower eye and is ready for hand sewing.. you have to be careful , tho, or you will unthread it if you pull too hard thru the fabric..
Sew With Love
Libby
User: LeapFrog Libby
Member since: 05-01-2002
Total posts: 2022
Sew, What's Up
Search the “Sew What’s New” Archive:
Visit Sew What’s Up for the latest sewing and quilting tips and discussions.
This page was originally located on Sew What’s New (www.sew-whats-new.com) at http://www.sew-whats-new.com/vb/archive/index.php/t-21832.html