Sew What’s Up Presents
The Sew What’s New Archive
This archived content is from Mary Wilkins’ sewing and
quilting message board “Sew What’s New,” which was
retired in August 2007. It is being provided by
“Sew What’s Up,”
which serves as the new home for many members of “Sew What’s New.”
From: lisalu
Date: 04-02-2007, 12:13 AM (1 of 3)
Hello everyone. I am new to embroidery and have found your messages to be helpful, yet I too am having trouble with my new brother se270d. It sews wonderfully and very easy to use. However, the embroidery part is not going so great. I have ruined 2 shirts now and continue to get the shuttle (or bobbin) area all clogged up with the top thread. My stabilizer (iron on, peel off) also continues to get torn. I have read the manual many times and am not sure how to correct this problem. I should say that my 1st try went perfect and now I can't figure it out. Any advice would be greatly appreciated!! Thanks - I can't wait to get it right!.
|
User: lisalu
Member since: 04-01-2007 Total posts: 3 |
From: bridesmom
Date: 04-03-2007, 01:59 AM (2 of 3)
|
I'm wondering if maybe you don't have some thread or fluff stuck in your bobbin area??? I was having a horrible time with my machine, and I finally pulled out the bobbin case, cleaned really good inside, put in a new needle, rethreaded everything and it worked fine. Good luck! I know how totally frustrating that can be!
Laura
Tickled pink with my Innovis 4000D |
User: bridesmom
Member since: 01-21-2004 Total posts: 2026 |
From: lisalu
Date: 04-03-2007, 11:59 PM (3 of 3)
| Thanks so much, I'll try that! Lisa |
User: lisalu
Member since: 04-01-2007 Total posts: 3 |
Visit Sew What’s Up for the latest sewing and quilting tips and discussions.
This page was originally located on Sew What’s New (www.sew-whats-new.com) at http://www.sew-whats-new.com/vb/archive/index.php/t-21966.html
Sew What’s Up is hosted by ZenSoft