Sew What’s Up Presents
The Sew What’s New Archive
This archived content is from Mary Wilkins’ sewing and
quilting message board “Sew What’s New,” which was
retired in August 2007. It is being provided by
“Sew What’s Up,”
which serves as the new home for many members of “Sew What’s New.”
From: Cynret
Date: 11-29-2003, 08:59 AM (1 of 2)
| I have a new Juki 5 thread serger which I am just beginning to get acquainted with. The 5/8 inch seam allowance line comes out at approx. 1 1/4 inches. I don't know if there is an adjustment that I should make, or compensate for this. I have tried to communicate with the Juki rep. in Florida, but they do not reply. Does anybody else have a Juki and what kind of support do they offer. Cynret |
User: Cynret
Member since: 05-25-2003 Total posts: 17 |
From: foxy
Date: 11-30-2003, 01:05 PM (2 of 2)
|
Originally posted by Cynret I have a new Juki 5 thread serger which I am just beginning to get acquainted with. The 5/8 inch seam allowance line comes out at approx. 1 1/4 inches. I don't know if there is an adjustment that I should make, or compensate for this. I have tried to communicate with the Juki rep. in Florida, but they do not reply. Does anybody else have a Juki and what kind of support do they offer. Cynret Hi-- i do not own a Juki but what I would do is measure 5/8 inch from the needle & mark it on the serger with masking tape. That way you will know where your 5/8 inch seam allowance is. Hope this will help you. 
|
User: foxy
Member since: 11-13-2003 Total posts: 58 |
Visit Sew What’s Up for the latest sewing and quilting tips and discussions.
This page was originally located on Sew What’s New (www.sew-whats-new.com) at http://www.sew-whats-new.com/vb/archive/index.php/t-11494.html
Sew What’s Up is hosted by ZenSoft